Mechanical Permit Fee Schedule
| Service |
Fee |
| Minimum Permit Fee |
$40 |
| Technology Fee |
$10 |
| Installation of Each Refrigerated Air System |
| Each unit up to 5 tons |
$20 |
| Each unit over 5 tons |
$45 |
| Each air handler unit up to 10,000 CFM |
$5 |
| Each air handler unit over 10,000 CFM |
$8 |
| Heating Systems |
| Installation of each direct-fired unit heater, boiler, hot air fuirnace or central heating plant |
| Each unit up to 250,000 BTU |
$20 |
| Each unitover 250,000 BTU |
$45 |
| Each PTAC/VTAC Unit |
$10 |
| Exhaust/ Ventilation Systems |
| Installation of each blower or fan connected to a duct system |
$5 |
| Duct Type (Commercial Only) |
| Flex Duct |
$25 |
| Metal Duct |
$50 |
| For issuing each permit, only charged if permits is striclty for duct |
$40 |
| Re-Inspection Fee |
| This fee will be charged after the 2nd failed inspection and after each subsequent failed inspection. |
$55 |
| Appeals to the Building Inspections Advisory & Appeals Board |
$100 |
| 3rd Party Commercial Mechanical Inspection |
$125 |
| 3rd Party Multi-Family/Townhouse Mechanical Inspection |
$77 |
| 3rd Party Residential Mechanical Inspection |
$77 |
Penalty for Working Without a Permit
In case any work, for which a permit is required by this chapter, is started prior to obtaining said permit, the fees above shall be doubled. The payment of such doubled fee shall not relieve any person from complying with the requirements of this chapter in execution of work, nor from other penalties prescribed herein.